Skip to content
English - United States
  • There are no suggestions because the search field is empty.

Configuring Ubiquiti UniFi Cloud Gateway to use Lumiun DNS with DoH and DNS Stamp

This configuration will allow the UniFi Gateway to forward DNS requests to Lumiun DNS using the DNS-over-HTTPS protocol at a DNS Stamp address, a secure format that encrypts communication between the gateway and the DNS server.

All devices on the local network that use the UniFi Gateway as a DNS server will follow the filtering and security rules defined in the Policy linked to the Site configured in the Lumiun DNS panel.

The instructions apply to UniFi Cloud Gateway devices. Depending on the version, the same configuration procedure will apply to UniFi Dream Machine and UniFi Security Gateway devices.

Finding the DNS Stamp on the Lumiun DNS panel

  1. Acess the Lumiun DNS dashboard.

  2. Go to the Sites page and click Settings for your Ubiquiti UniFi site.

  3. In the Change Site Data section, you will find your DNS Stamp address.

  4. Copy the DNS Stamp to use later during configuration.

Configuring the UniFi gateway to use encrypted DNS via DNS Stamp

  1. Access the management interface of your UniFi gateway.

  2. Click the Settings icon.

  3. After that, click CyberSecure.

  4. Click Protection.

  5. In the Encrypted DNS section, select the Custom option.

  6. In the message that appears, click Enable.

  7. Enter a name in Server Name and in the DNS Stamp field, paste the address that was copied from your Site settings.

  8. Finally, click Add and Apply Changes.

That's it! You can now view reports on your Lumiun DNS dashboard and also define policy rules.